[Elecraft] K1

[Mike Short]

Thank you for the clarification.

On Sun, Jun 30, 2024 at 19:37 W3FPR <w3fpr111 at gmail.com> wrote:

> Mike,
>
> It will not make any difference as long as all the band components
> (crystal, capacitors, and toroids) are correct for each band.
> While it is nice to have the lower band as B1 and the upper band as B2,
> it is not necessary, just set each band to agree with the low/upper band
> frequency in the menu.
>
> 73,
> Don W3FPR
>
> On 6/30/2024 4:44 PM, Mike Short wrote:
> > I have a partially assembled 20/40 kit I acquired. The directions say to
> > have band 1 the lowest frequency but this one is reversed. 20 is band 1
> and
> > 40 is band 2. What may be the issues with leaving it like this?
> >
>