[Elecraft] K1

[W3FPR]

Mike,

It will not make any difference as long as all the band components 
(crystal, capacitors, and toroids) are correct for each band.
While it is nice to have the lower band as B1 and the upper band as B2, 
it is not necessary, just set each band to agree with the low/upper band 
frequency in the menu.

73,
Don W3FPR

On 6/30/2024 4:44 PM, Mike Short wrote:
> I have a partially assembled 20/40 kit I acquired. The directions say to
> have band 1 the lowest frequency but this one is reversed. 20 is band 1 and
> 40 is band 2. What may be the issues with leaving it like this?
>