[Elecraft] Downsizing.... <sniff, sniff>

[Clay Autery]

Still need to downsize.  My K3s/P3 etc. is just a little to much volume 
to consume on the travel trailer, and between traveling and visiting my 
kids and grandkids, I am simply not going to have a lot of time to use 
my "base station".  I need to me mobile/portable, so I am going to try 
to put together a fully decked out KX3 for the truck/trailer.

Thus, I need to find a home for my dearly loved and spoiled K-Line (sans 
amp and tuner).

Would some of you more knowledgeable and experienced operators please 
respond and offer your opinion as to the best price for this entire 
package that I can expect?
Privately if you choose (pref), but her in public is ok, too.

Here is what I have, and I need help determining what I can reasonably 
recover when/if I find a worthy buyer.  😉 kinda

This combo was/is assembled and tuned and petted, and...  by me with 
exacting detail, babied like my own children, regular checkups back at 
Elecraft.

Transceiver:  Elecraft K3s, Serial # 106xx

K3S/100-K   $2649.95    1     K3S 100W Xcvr. (Modular Kit) (Upgraded 
from SO-239 to best N-Connectors I could find.)
KAT3A-K     $319.95     1     K3S ATU (Modular Kit)
KRX3A-K     $699.95     1     High Performance Subreceiver Kit (It was 
the LAST Brand New Unit on the shelf!)
K144XV-K     $389.95     1     144-148 MHz 10 W Internal Module
K144RFLK     $99.95     1     K144XV Reference Lock Board
Filters:
KFL3A-400 8-pole   $312.90     2     400 Hz 8 pole filter (matched, had 
to buy 3 to get proper match)
InRad 700Hz     $280.00     2     matched 700Hz, 8-pole filters (These 
were a custom non-Elecraft batch of filters made specifically for the 
Elecraft folks.  They are amazing.
KFL3A-2.8K-IR_2.8 kHZ     $299.90     2     Matched 2.8k filters
KFLA3A-6K  $254.95     2     6K AM/ESS) filters
KFL3B-FM     $205.00     2     13k FM filters
Additional Upgrades:
KTCXO3-1    $119.95     1     K3S TCXO (0.5ppm)
K3EXREF     $99.95      1     Ext 10MHz Ref Input for K3S
KBPF3A      $359.90     2     K3S Gen. Cov. RX Modules ( 1 per receiver)
KDVR3       $149.95     1     K3S Dig. Voice Recorder
Audio:
SP3     $359.90     2     SP3 External Speakers

Elecraft P3, Serial # 41xx

P3-K        $699.95     1     P3-K Panadapter Kit
P3SVGA      $279.95     1     P3 Video/FFT Adapt.
P3TXMON     $209.95      1     P3TXMON P3 Transmit Monitor
DCHF-200     FREE     1     1.8-54 MHz, 0.1-200W Coupler

To my knowledge, ALL applicable options and updates have been applied.

06/01/2017 - Factory checkup, upgrades:  $300
K-Pod update,
IMD update,
testing, rtn to factory spec. (verified)

01/21/2020 - Trip to Factory:  $291.69
Replace shunt resistor near Q2,
Replace TMP socket on 2M module,
Sub-RX installation verified correct,
KPAIO3MDKT Installation,
KPAIO fan input fix,
upgraded KPA3A

02/01/2020 - ID and replace all NON-stainless steel hardware on 
exteriors of chassis.

I now have $9206.88 total into the entire line.

Includes binder with documentation on most everything and changes 
posted.  Also includes various cables, extras, CD/DVD with manuals, 
data, software, firmware, et al.
All one would need to get going is a power supply (I can hook you up, 
but they are heavy!), and a some sort of antenna...

73,

-- 
Clay E. Autery, Jr.
KY5G