[Elecraft] K2 Sidetone help

[W3FPR]

The K2 firmware level will be briefly displayed if you hold a button in 
while powering on.

73,
Don W3FPR

On 10/28/2023 7:57 PM, Michael Carter via Elecraft wrote:
> Hi Mike,
>
> You mentioned that you jumped through
> all the menu hoops to no avail.  Do you
> know which version of firmware 2.04 you
> have installed? (there will be a letter after
> the 2.04, e.g. 2.04P or 2.04R).
>
> If you have set the sidetone level to, say,
> 060 and the sidetone pitch to a value
> between 500 and 600 Hz, you should
> hear the sidetone in your headphones.
> If you haven't done it already, try the
> test of sidetone generator and audio amp
> described on p. 47 of the manual.  The
> SPOT switch should also activate the sidetone.
>
> If these tests don't work, it's time to
> probe with a scope and voltmeter.
>
>