[Elecraft] K3 Filters

[W3FPR]

Jim,

It is doubtful that will work if the K3 has been set to factory defaults 
by EEINIT.

73,
Don W3FPR

On 10/17/2023 11:59 AM, Jim McCook wrote:
> Dave,
>
> Open the K3 Utility and click on Calibration.  Scroll down to 
> Configure Crystal Filters.  The top line shows the various bandwidths 
> of the installed filters.  You can see the big picture there with the 
> checked boxes.
>      Jim W6YA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr111 at gmail.com