[Elecraft] KPA500 / KAT500 and W2 watt meter question

[Dean L/ K2WW]

I don't see the original thread only Bob's reply?
I've noticed these broken thread quite frequently...Has anyone else see
this?

73
Dean K2WW

On Tue, Oct 10, 2023, 11:09 AM Bob McGraw <rmcgraw at benlomand.net> wrote:

> Glenn:
>
> In the KAT500 manual, page 5. Figure 1 Cabling Diagram is the better way
> to connect the items.  It does not use the key line interrupt. That is
> the configuration which I have used, very successfully, for years.
>
> In the K3S, set the MENU for 20 watts TUNE power, and from the CONFIG
> menu PWR SET to Per Band.
>
> 73
>
> Bob, K4TAX
>
>
>
> On 10/10/2023 7:18 AM, elecraft-request at mailman.qth.net wrote:
> > Message: 23 Date: Tue, 10 Oct 2023 05:17:26 -0700 From: Glenn Maclean
> > <wa7spy at att.net> To: elecraft at mailman.qth.net Subject: [Elecraft]
> > KPA500 / KAT500 and W2 watt meter question Message-ID:
> > <3A0E28E4-8411-4394-A880-0FEC58BF323E at att.net> Content-Type:
> > text/plain; charset=us-ascii I just ordered the KPA500/KAT500 combo
> > and W2 watt meter for my K3S. Should I use the key line interrupt
> > connected to the W2 watt meter or should I connect the key line
> > interrupt to the KAT500? Do I even need to use key line interrupt with
> > the K line set up? Thanks in advance Glenn WA7SPY
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dean.k2ww at gmail.com