[Elecraft] KPA500 / KAT500 and W2 watt meter question

[Bob McGraw]

Glenn:

In the KAT500 manual, page 5. Figure 1 Cabling Diagram is the better way 
to connect the items.  It does not use the key line interrupt. That is 
the configuration which I have used, very successfully, for years.

In the K3S, set the MENU for 20 watts TUNE power, and from the CONFIG 
menu PWR SET to Per Band.

73

Bob, K4TAX



On 10/10/2023 7:18 AM, elecraft-request at mailman.qth.net wrote:
> Message: 23 Date: Tue, 10 Oct 2023 05:17:26 -0700 From: Glenn Maclean 
> <wa7spy at att.net> To: elecraft at mailman.qth.net Subject: [Elecraft] 
> KPA500 / KAT500 and W2 watt meter question Message-ID: 
> <3A0E28E4-8411-4394-A880-0FEC58BF323E at att.net> Content-Type: 
> text/plain; charset=us-ascii I just ordered the KPA500/KAT500 combo 
> and W2 watt meter for my K3S. Should I use the key line interrupt 
> connected to the W2 watt meter or should I connect the key line 
> interrupt to the KAT500? Do I even need to use key line interrupt with 
> the K line set up? Thanks in advance Glenn WA7SPY