[Elecraft] k3 Mic gain self resetting to 1

[Russ Edelen]

Some further info. Logging and control is via DXlab suite set up per the 
wiki through a serial port. The controls respond in both directions and 
the radio functions as expected during nets and general operation after 
the mic settings are adjusted. The problem only occurs at startup. The 
k3 and computer are shut down when not in use and the k3 is routed to a 
dummy load. The computer is powered on first.

As I mentioned it's not every time but seems to be more often then not.

Thanks for any advice.

Russ, KG7VQ