[Elecraft] WSJTX ON A MAC

[Howard Saxion]

I am using a Mac Mini M2Pro and use WSJT with my K4D.  When you install WSJT-X, there is a readme file with specific instructions on increasing the default swap file size. One has to do this using terminal (in the utilities application folder). Have you completed this step?

73 Howard WX7HS 

> On Jul 26, 2023, at 16:50, Richard Gilley <richgilley123 at gmail.com> wrote:
> 
> Hi all,
> 
> I loaded WSJTX on a IMAC and ran into this issue on my K3:  I have receive and Tx ok but I also have  ERR PTT displayed.  Pressing any key does not clear this error and I have no access to power adjust as an example.  CAT does go green but still the error.
> I have gone over my WSJTX settings and settings on the K3 as listed in the manual, and I think I have the audio set correctly in the MAC.
> 
> I can run WSJTX on a PC with the K3 without any issue.
> 
> I have a feeling that not many folks use Mac but it is what I would prefer to use.
> 
> Thank you all for reading about my problem and that there is solution.
> 
> Best regards
> R Gilley
> AD1G
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to howardsaxion at mac.com