[Elecraft] KX3 manual page 14 regardincg "TUNE".
JEROME SODUS
jsodus at comcast.net
Mon Feb 6 13:03:46 EST 2023
Please disregard my post as I have "re-found" the answer.
Long story short...I started this activity some six months ago and had to stop for personal reasons.
I had simply forgotten that Ray K2ULR had provided the answer back then.
When I realized it, I tried to stop my post but Keith WE6R emailed me that there is no way to do that.
Apologies for taking up the bandwidth.
88 jerry km3k
> On 02/06/2023 11:36 AM Lee Hiers <lee.hiers at gmail.com> wrote:
>
>
> CW = continuous wave, an unmodulated carrier
>
> CW <> Morse code, although many take it to mean that these days. One doesn't "learn CW", one "learns Morse code".
>
> Do you have a watt meter between the KX3 and the loop?
>
> 73 de Lee, AA4GA
>
>
>
>
> On Mon, Feb 6, 2023 at 11:14 AM JEROME SODUS <jsodus at comcast.net mailto:jsodus at comcast.net > wrote:
>
> > > Hello,
> >
> > My question is about the "TUNE" selection (half second hold of the XMIT button).
> >
> > The manual's wording is....
> > "TUNE is used to put out a CW signal at the power level selected by the __ PWR control.".
> >
> > Normally, "CW" means morse-code.
> > But, in this instance, am I correct in thinking it stands for "continuous wave" or, in other words, an unmodulated FM signal (constant carrier and
> > amplitude)?
> >
> > The reason for my email is....
> > I am setting up a Magnetic-Loop-Antenna that has a "remote tuning" capability and that "remote tuning" set-up is not going very well for me.
> > If the KX3 is putting out a continuous wave, then there is a serious problem with the "remote tuning" box.
> >
> > TIA for any reply.
> > 73 jerry km3k
> > KX3 #6088
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to lee.hiers at gmail.com mailto:lee.hiers at gmail.com
> >
> > >
More information about the Elecraft
mailing list