[Elecraft] K2-Bias Resistor When Using Mic Connector Pin 1 for Soundcard Input

Peter Eijlander (PA0PJE) pa0pje at xs4all.nl
Mon Apr 3 06:05:37 EDT 2023


Don (and Jim for info),

There could have been another reason for not showing any text in the 
text-part if the message.

Jim might use a device like a "smart"phone  that sends HTML-only mail.
This mailman server is set to suppress and delete any HTML markup and 
attachments in received mails before sending it to all participants.

So, for anyone reading this: Send at least Plain Text + HTML or better 
still Plain Text Only to this mail-reflector.

73,
Peter - PA0PJE



Op 2023-04-03 om 02:13 schreef W3FPR:
> Jim,
> 
> If I understand your question in the subject line (but no text to detail
> your question) - then the answer is that it all depends on the
> soundcard.  If it has a DC blocking capacitor in the input, then all is
> well with the bias resistor in place.  If there is no DC blocking at the
> soundcard, the the bias resistor will have to be removed or a special
> cable with a DC blocking capacitor will have to be inserted between the
> mic input and the soundcard AF input.  A capacitor of 1 to 5 uF should
> do fine.
> 
> If this does not answer your question, the respond with more text
> instead of us trying to guess from just a subject line.
> 
> 73,
> Don W3FPR
> 
> On 4/2/2023 6:31 PM, Jim Campbell wrote:
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w3fpr111 at gmail.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pa0pje at xs4all.nl


More information about the Elecraft mailing list