[Elecraft] KAT-500 Issue!

[Dave (NK7Z)]

Thanks Andy, I can locate it from here...  Having a bit more info will 
help in seeing what needs to be checked!

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 5/20/22 07:55, Andy Durbin wrote:
> "I seem to remember there was a change for those wire links but don't have the details here."
> 
> This discussion suggests there were two board configurations - one with both links on the same side of the board and the other with one link on each side.  It's not clear when the change was made or even which is the later configuration.
> 
> http://elecraft.85.s1.nabble.com/KAT-500-Unreliable-Tuning-td7668468.html#a7668497
> 
> Another thread said separate the wires and insulate them if they had arced.
> 
> There may be more discussion to be found with a more thorough search of the archive.
> 
> Sorry, have not experienced the problem and don't have a better answer.
> 
> Andy, k3wyc
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net