[Elecraft] K3S Antenna Selection

[David Olean]

A few years ago, someone had supplied PC boards  to the Elecraft 
reflector, that would replace the KANT3 and provide for two antennas. I 
got one and it works great.

I wish I had more of them!  As far as I know they are no longer 
available. It was a one time thing.

Dave K1WHS

On 5/4/2022 11:10 PM, Keith Onishi wrote:
> Hello John,
>
> Tha is not possible. ANT2 connecter and antenna switching function are provided with KAT3 ATU.
>
> I have 3 antenna feed lines. To switch the antennas according to K3 band selection, I use KAT500 ATU which has 3 SO-239m connecters. Of course my K3 does not have KAT3 option.
>
> 73 de JH3SIF, Keith
>
>
>> 2022/05/05 9:33、John Stengrevics <jstengrevics at comcast.net>のメール:
>>
>> I have a K3S without antenna tuner.  Is there any way to enable ANT2  to use a different antenna than ANT1?  For example, I have a 6 meter antenna connected to ANT1 and would like to use ANT2 for a 10 meter antenna.  From what I am reading in the manual and Cady’s book, this doesn’t seem possible.
>>
>> Thanks.
>>
>> John
>> WA1EAZ
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jh3sif at sumaq.jp
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k1whs at metrocast.net