[Elecraft] K3S Antenna Selection

[Keith Onishi]

Hello John,

Tha is not possible. ANT2 connecter and antenna switching function are provided with KAT3 ATU.

I have 3 antenna feed lines. To switch the antennas according to K3 band selection, I use KAT500 ATU which has 3 SO-239m connecters. Of course my K3 does not have KAT3 option.

73 de JH3SIF, Keith


> 2022/05/05 9:33、John Stengrevics <jstengrevics at comcast.net>のメール:
> 
> I have a K3S without antenna tuner.  Is there any way to enable ANT2  to use a different antenna than ANT1?  For example, I have a 6 meter antenna connected to ANT1 and would like to use ANT2 for a 10 meter antenna.  From what I am reading in the manual and Cady’s book, this doesn’t seem possible.
> 
> Thanks.
> 
> John
> WA1EAZ
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jh3sif at sumaq.jp