[Elecraft] Elecraft K4 Vs. Flex 6400

[John Simmons]

Take a listen to Rob Sherwood talk about the K4:
https://www.hamradioworkbench.com/podcast/hrwb-149-receiver-performance-with-rob-sherwood


-- 
73,
-de "Curly" John NI0K in rural Debs, MN USA
Hamshack Hotline: 6100000271

Ian Kahn wrote on 3/5/2022 8:00 AM:
> Kurt,
>
> A good starting point would be Rob Sherwood's receiver analysis. It can be
> found at:
>
> http://www.sherweng.com/table.html
>
> I'm not sure/aware of anyone who performed direct transmitter comparisons.
>
> 73 de,
>
> Ian, NV4C
>
> On Sat, Mar 5, 2022 at 1:19 AM Kurt Pawlikowski <kurtt at pinrod.com> wrote:
>
>> Hi!
>>
>>       I was wondering whether there is anyone who has done a side-by-side
>> comparison between the K4 and the Flex 6400 or any other Flex "direct to
>> digital" radio?
>>
>>       Background: As it happens, I purchased a 6400, which I received
>> about 9 months ago. I use it with a computer, but I had ordered a
>> Maestro when I ordered the 6400. Unfortunately, the Maestro is still on
>> back-order and will be until some time next year. When I checked with
>> Elecraft, they said the delay time for a K4 was about 6 months (no, I
>> won't hold them to that!). So, I'm wondering if it would be worth
>> jumping to the K4. Mind you, I'm not unhappy with the Flex and, when I
>> ordered it I had considered a K4, but it was outside my budget at that
>> time. I'm rethinking that decision. Also, I've been an Elecraft fan for
>> quite some time. At any rate, I'd like some opinions from experience and
>> the only ones I have seen were written before the K4 was available. So,
>> a little help would be appreciated! Thanks!
>>
>>       k WB9FMC
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nv4c.ian at gmail.com
>