[Elecraft] KX3 and Heatsink
Julia Tuttle
julia at juliatuttle.net
Mon Jun 13 18:12:40 EDT 2022
Yeah, what Eric said. Elecraft says, in the "Output Power" specification:
"5 W or less recommended for high-duty-cycle modes (FM, AM, DATA). Power
will automatically be reduced if PA temperature or current limits are
exceeded." The stock heatsink is generally adequate *within* that
recommendation. If you'd like to *exceed* it, you'll benefit from an
aftermarket heatsink. I have the "ultimate" ProAudio one as well, and it is
generally adequate up to the max power output of the KX3 (10-15 W) on
high-duty-cycle modes.
73,
Julie
On Mon, Jun 13, 2022 at 5:12 PM Eric Garner <garnere at gmail.com> wrote:
> When you say " Elecraft-supplied heat sink" do you just mean the
> little heat spreader plate?
>
> The factory provided thermal solution is totally fine unless you want to
> run high duty cycle modes at full power. I have the proaudio ultimate (
> https://proaudioeng.com/pae-kx32-ultimate-heatsink-kit-elecraft-kx3/) on
> mine and have no complaints.
>
> Eric KI7LTT
>
>
> On Mon, Jun 13, 2022 at 1:54 PM Bill Lederer <w8lvn.9 at gmail.com> wrote:
>
> > Folks:
> >
> > I have a recently-purchased KX3 that includes the Elecraft-supplied heat
> > sink.
> >
> > Is there any opinion of this does an adequate job compared to the
> ProAudio
> > one?
> >
> > Thanks,
> > --
> > --w8lvn--
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to garnere at gmail.com
> >
>
>
> --
> --Eric
> _________________________________________
> Eric Garner
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to julia at juliatuttle.net
>
More information about the Elecraft
mailing list