[Elecraft] K3 Birdies

[Lyle Johnson]

In addition to cable dress and being sure the cables are fully
inserted/mated, be sure all the shields and the case have good
metal-to-metal contact.  Might want to loosen the various screws 1/4 turn
and then tighten them.  The screw on the left panel that ties to the shield
behind the DSP board is very important for keeping a lot of the bridies in
their cage :-)

73,

Lyle KK7P

On Sat, Jul 30, 2022 at 9:46 AM Victor Rosenthal 4X6GP <k2vco.vic at gmail.com>
wrote:

> SIG RMV can help, but before you do this, look in the manual for
> instructions about how to dress the cables to and from the synthesizers
> and the SUBRX. Make sure they are plugged in all the way, too.
>
> 73,
> Victor, 4X6GP
>
> > I have an 11 year old K3 s/n 6xxx.  I have noticed lately there seem
> > to be quite a few birdies pretty well everywhere.
>