[Elecraft] K4 to KPA500?
Rick Bates, NK7I
rick.nk7i at gmail.com
Tue Feb 22 14:50:56 EST 2022
Which antenna port on the KPA1500 are you using? Port 2 is disconnected
at power off.
That's one small nit with the amp, the antenna switch and tuner are on
the same power source as the amp; all or nothing. It takes getting used
to, after being familiar with the KPA500/KAT500 combo.
73,
Rick NK7I
On 2/22/2022 7:13 AM, Dave wrote:
> Bob
>
> There has been a thread on the K4 groups.io on this subject. There is much
> more info concerning the K4 on there. While mine works correctly, some
> don’t. I think a pin needs cutting off, you might check with a breakout box.
>
> 73 Dave G4AON
>
> On Tue, 22 Feb 2022 at 14:53, Robert Sands<k7voradio at gmail.com> wrote:
>
>> My old cable, used with K3 and KPA500 works fine with K4 to KPA 1500
>> except the K4 receive is shut down when 1500 in off, regardless of cable or
>> use of interruptor. Ideas?
>>
>> Happens Only on 40 and 75, not 20. No receive until 1500 is on. I also
>> tried the new cable.
>> Bob
>> K7VO
>>
>> On Tue, Feb 22, 2022, 5:27 AM Dave<dave.g4aon at gmail.com> wrote:
>>
>>> No difference between using the K3 and K4. I use the same interconnection
>>> cable that I used for the K3.
>>>
>>> The K4 shows the power level against the power control knob as appropriate
>>> when you go from standby to operate.
>>>
>>> Power setting/control with the K4 and KPA500 is well controlled.
>>>
>>> 73 Dave
>>> K4D #286
>>> KPA500
>>
>>> --
>>> Sent from my iPhone SE
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home:http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help:http://mailman.qth.net/mmfaq.htm
>>> Post:mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by:http://www.qsl.net
>>> Please help support this email list:http://www.qsl.net/donate.html
>>> Message delivered tok7voradio at gmail.com
>>>
>> --
> Sent from my iPhone SE
> ______________________________________________________________
> Elecraft mailing list
> Home:http://mailman.qth.net/mailman/listinfo/elecraft
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:Elecraft at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
> Message delivered torick.nk7i at gmail.com
More information about the Elecraft
mailing list