[Elecraft] MH3 mic case

[Bill Frantz]

I like to mix in some short lengths of fiberglass with the 
epoxy. It provides the strength while the epoxy provides the 
"glue" holding everything together. An example is repairing the 
ashtray cover on my 1993 Mazda Miata (with 300,000+ miles). I 
repaired it at least two years ago, and it is still holding up.

73 Bill AE6JV

On 9/3/21 at 8:55 AM, len at ka7ftp.com wrote:

>I put a dap of epoxy on the studs and the base.  I put a little
>inside the actual stud where it meets the base.  Next I put the two shell
>pieces together and held it in place with a rubber band.  After 24 hours I
>removed the screws and added more epoxy around the studs for additional
>strength.  I also epoxied in the broken cable retainer.  Just make sure you
>don't put epoxy where it might interfere with the electrical parts of the
>cord.
-----------------------------------------------------------------------
Bill Frantz        | If the site is supported by  | Periwinkle
(408)348-7900      | ads, you are the product.    | 150 
Rivermead Road #235
www.pwpconsult.com |                              | 
Peterborough, NY 03458