[Elecraft] MH3 mic case

[len at ka7ftp.com]

Hi Ian,

	I have exactly the same issue.  I too am a CW guy and my MH3 only
hangs on a hook. The case "studs" appear to have cracked under the weight of
the cord.  I emailed Elecraft support and was told the Mic was no longer
under warranty and I would need to buy a new mic.  No one answered my follow
up email asking if I could get a discount on a replacement mic. 

	In any case I opted to just repair what I have.  If you have not
unscrewed the screws from the case and all three studs are broken, like mine
was, the studs can easily be epoxied.  I first removed ALL the working parts
from the case.  Keep an eye out for the button spring which is just a small
flexible "rod".  There was also a small piece of broken plastic which was
used in the cable retainer.

	Once the case is emptied out the base where the studs broke can be
accessed.  I put a dap of epoxy on the studs and the base.  I put a little
inside the actual stud where it meets the base.  Next I put the two shell
pieces together and held it in place with a rubber band.  After 24 hours I
removed the screws and added more epoxy around the studs for additional
strength.  I also epoxied in the broken cable retainer.  Just make sure you
don't put epoxy where it might interfere with the electrical parts of the
cord.  

	After another 24 hours I reassembled the mic and everything
functions as expected.  It's a bummer that the plastic casting is inferior.
But with the reinforcement it is now better than new.

73

Len


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Ian Liston-Smith
Sent: Friday, September 03, 2021 3:09 AM
To: Elecraft List <elecraft at mailman.qth.net>
Subject: [Elecraft] MH3 mic case

Does anyone know if Elecraft sell replacement cases for this expensive
microphone? I've barely used mine (I'm a CW chap) and it's already fallen
apart! The three plastic internal mounting pillars have snapped off. I guess
it's been dropped, but only on to carpet and I'm minded to think a $70 mic
should easily withstand that.

Last month I emailed Elecraft via their online parts order form, but not had
an acknowledgement. Maybe they're all on summer leave?

Thanks and 73,

Ian, G4JQT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to len at ka7ftp.com