[Elecraft] K2 alive again, yay!
Louandzip
louandzip at yahoo.com
Wed Jul 21 08:38:50 EDT 2021
There is a protected Li-Ion pack for the K2 available. With Lio-Ion, proper battery management is essential.
https://www.batteryspace.com/custom-lifepo4-18650-battery-12-8v-4500-mah-57-6wh-7a-rate-w-pcb-and-connector.aspx
I briefly looked at putting together a LiFePO4 pack for the K2, but haven't yet done anything with that idea. LiFePO4 is more forgiving and more lead-acid-like in its care a feeding. Lower energy density than Li-Ion, but still much better than lead-acid.
Lou W7HV
On Tuesday, July 20, 2021, 7:52:06 PM MDT, jerry <jerry at tr2.com> wrote:
On 2021-07-18 19:50, Douglas Hagerman via Elecraft wrote:
> Next step, adding the the immensely heavy internal lead-acid battery.
*** I wonder how hard it would be to add instead a much lighter
lithium-ion
battery pack? Individual 18650 cells are now routine at 2.5A-H, and
available up
to 3.5A-H. The technology has gotten standardized, and you can buy a
BMS ( Battery
Management System ) card off the shelf. The only hard thing is spot
welding the tabs.
A 3S1P ( three cells in series, 1 in parallel ) pack would probably do
fine.
I just got back from the garage where I repaired such a pack. It was
out of an 85W
cordless vacuum cleaner. Just four cells.
Like any battery, the voltage varies with charge. These cells are
about 4.2V fully
charged, and 3.4 when dead. For three cells, that would be 12.8V fully
charged, and 10.2
when it's time to recharge.
I got all set up to weld the cell tabs for an ebike project. The
ratio of energy storage to battery weight is much better than lead-acid.
- Jerry KF6VB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to louandzip at yahoo.com
More information about the Elecraft
mailing list