[Elecraft] K3S audio quality issue [SOLVED]

[Henk de Vries]

No, one would not expect a change when that button is pressed.However as soon as the VFO is moved it would be logical that the frequency is in line with the display.So the first "VFO move" should remove the offset.73 HenkPA0C
-------- Oorspronkelijk bericht --------Van: jerry <jerry at tr2.com> Datum: 23-08-2021  16:01  (GMT+01:00) Aan: elecraft at mailman.qth.net Onderwerp: Re: [Elecraft] K3S audio quality issue [SOLVED] On 2021-08-22 19:45, Michael Kholodov via Elecraft wrote:> If you have the tuning step 10Hz, tune to, say, 7.200.56 and then> switch to coarse tuning, the display will show 7.200.5. But this 60Hz> offset will still be present. Then no matter how you tune at the> coarse setting, you will mistune. To fix that you should always reset> the fine tuning offsets to zero before switching to coarse.> It is apparently a bug in the software because the normal expectationOTOH, do you want the frequency to *change* when all you did was to hit the "rate" button? The K2 behaves the same way.  This is one of those UI things where there really is no "right" answer.                    - Jerry KF6VB______________________________________________________________Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Elecraft at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to hdv at kpnplanet.nl