[Elecraft] K3S audio quality issue [SOLVED]

[jerry]

On 2021-08-22 19:45, Michael Kholodov via Elecraft wrote:
> If you have the tuning step 10Hz, tune to, say, 7.200.56 and then
> switch to coarse tuning, the display will show 7.200.5. But this 60Hz
> offset will still be present. Then no matter how you tune at the
> coarse setting, you will mistune. To fix that you should always reset
> the fine tuning offsets to zero before switching to coarse.
> It is apparently a bug in the software because the normal expectation

OTOH, do you want the frequency to *change* when all you did was to hit 
the "rate" button? The K2 behaves the same way.  This is one of those UI 
things where there really is no "right" answer.

                    - Jerry KF6VB