[Elecraft] T1 Tuner Question ?

[Paul Jewell]

Make sure you haven't bypassed the tuner. I have this (excellent) tuner, 
but I have been caught out a couple of times when the tuner has been in 
bypass, and I have tried to tune. You will hear the relays when it is 
tuning.

Paul / MW7PAJ

On 15/08/2021 01:00, James Bennett via Elecraft wrote:
> Paul,
>
> I believe you should hear a few relays click. If you are connected to a load that the T1 “knows” there may be no click. You can test that by using a different antenna or a dummy load.
>
> Jim / K7TXA
>
>> On Aug 14, 2021, at 2:21 PM, Paul Ecker <eckerpw at gmail.com> wrote:
>>
>> I just purchased a T1 Tuner from a fellow Ham. In reading the manual, it
>> says:
>>
>> *To start tuning, transmit while the green LED is flashing (about 3
>> seconds). If you use SSB voice or a CW keyer, relay switching will start
>> and stop. Keep transmitting until all LEDs turn off.*
>>
>> I am not hearing or feeling any relays switching on and off. Is that
>> normal??
>> Any other suggestions on testing the T! to ensure I have a working unit?
>>
>> 73 Paul w2eck
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w6jhb at me.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to paul at teulu.org