[Elecraft] T1 Tuner Question ?

[James Bennett]

Paul,

I believe you should hear a few relays click. If you are connected to a load that the T1 “knows” there may be no click. You can test that by using a different antenna or a dummy load.

Jim / K7TXA

> On Aug 14, 2021, at 2:21 PM, Paul Ecker <eckerpw at gmail.com> wrote:
> 
> I just purchased a T1 Tuner from a fellow Ham. In reading the manual, it
> says:
> 
> *To start tuning, transmit while the green LED is flashing (about 3
> seconds). If you use SSB voice or a CW keyer, relay switching will start
> and stop. Keep transmitting until all LEDs turn off.*
> 
> I am not hearing or feeling any relays switching on and off. Is that
> normal??
> Any other suggestions on testing the T! to ensure I have a working unit?
> 
> 73 Paul w2eck
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w6jhb at me.com