[Elecraft] Need a tuning knob for K2

[Don Wilhelm]

Frank,

Do you have the new encoder?  I don't know which SN they were started.  
That is the key to which knob you need.  If the knob is off, lift the 
fiber washers and check to see if there is a green tab in the hole to 
the right of the encoder shaft.  If the hole is empty, you have the new 
encoder.
Order the new knob from Elecraft - they no longer have the older knob.
With the new knob, you need 3 fiber washers stacked.

73,
Don W3FPR

On 4/25/2021 9:00 AM, Frank Krozel wrote:
> I am looking for a tuning knob for a K2 SN 5630
> If I recall there were two different sizes of shafts, this would be the second (maybe current) size.
>
> This is SN
> -73-  Frank    KG9H
> kg9hfrank at gmail.com
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to don at w3fpr.com