[Elecraft] Controlling KAT500/KPA500 with Icom 7610

[Buck]

I made up the cable from the Molex to the TUNE on the KAT500 as 
described and have checked continuity from end to end.  All OK.

I have the SEND from the 7610 connected to the PTT RLY on the KAT500.

When I change bands, nothing happens.  Is there another setting I need 
to change in the 7610?

Buck, k4ia
Honor Roll
8BDXCC
EasyWayHamBooks.com

On 4/19/2021 10:35 AM, Lyn Norstad wrote:
> Buck -
> 
> The KAT500 Rev D1 Manual, pages 13, 14 and 15 cover the Icom connections.
> 
> The "AH4" cable (the one you're describing) powers the KAT500 and controls
> the "Tune" function.  If yours isn't doing anything, the cable is probably
> defective.
> 
> What else do you have connected?
> 
> 73
> Lyn, W0LEN
> 
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Buck
> Sent: Monday, April 19, 2021 7:42 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Controlling KAT500/KPA500 with Icom 7610
> 
> Anyone who has succeeded, I could use some help.  The connection from
> the 7610 molex antenna tuner jack to the "Icom in" jack on the KSAT500
> doesn't do anything.
>