[Elecraft] Controlling KAT500/KPA500 with Icom 7610

[Lyn Norstad]

Buck -

The KAT500 Rev D1 Manual, pages 13, 14 and 15 cover the Icom connections.

The "AH4" cable (the one you're describing) powers the KAT500 and controls
the "Tune" function.  If yours isn't doing anything, the cable is probably
defective.

What else do you have connected?

73
Lyn, W0LEN


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Buck
Sent: Monday, April 19, 2021 7:42 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] Controlling KAT500/KPA500 with Icom 7610

Anyone who has succeeded, I could use some help.  The connection from 
the 7610 molex antenna tuner jack to the "Icom in" jack on the KSAT500 
doesn't do anything.
-- 
k4ia, Buck
K3s# 11497
Honor Roll  8B DXCC
EasyWayHamBooks.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lyn at lnainc.com