[Elecraft] 2M internal Xverter now 3.5 kc lower

[Randy Diddel]

Hi John,

I have two emails in to support, one for this issue and another for something else. Both have gone unanswered. I have also left voicemail for support as well. 

I am guessing that they are way behind on orders (have an order in for the 10mHZ RefLock too) and support requests due to the lockdown.

Hopefully, it is an easy fix.

/randy

> On Sep 16, 2020, at 8:54 AM, John Stengrevics <jstengrevics at comcast.net> wrote:
> 
> Hi Randy,
> 
> I have a similar problem, but only 800Hz low.
> 
> The solution was beyond my capabilities. So, I have ordered a K4 and will have it fixed by Elecraft before I sell my K3S.
> 
> Unfortunately, I deleted the email from tech support.  I would suggest you call Elecraft and try to be connected to tech support if you want to give it a try.
> 
> 73,
> 
> John
> WA1EAZ
> 
> 
> 
>> On Sep 16, 2020, at 10:13 AM, Randy Diddel <k5rhd.73 at gmail.com> wrote:
>> 
>> Hi group,
>> 
>> I have submitted to support requests in the last week to Elecraft directly with no response so I will try here:
>> 
>> This summer, I recently bought the K144XV and the Reference lock board for it. The past two mornings I have experienced a drop in RX frequency by 3.5kc.  I check into a Net on 144.200. I checked in and after about 20 minutes the net disappeared!  I could hear it down a little and tuned to 144.196.50 and picked it back up again. I asked the net control if it had moved and they were all claiming to still be on 144.200! The XVerter is less than 3 months old.
>> 
>> Any ideas?
>> 
>> 73
>> 
>> K5RHD
>> 
>> /randy
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jstengrevics at comcast.net 
>