[Elecraft] K3 RX dead 80/20 meters

[Jim Kennedy]

Tnx Vic, yes Mike K6MKF pointed that out to me also and that was the problem. Operator error once again. Thanks guys ! Now, excuse me while I go wash the egg off my face.  This is an awesome group.

Jim
W7OUU

----- Original Message -----
From: "Vic Rosenthal" <k2vco.vic at gmail.com>
To: "Jim Kennedy" <kennedyjp at cableone.net>
Cc: "elecraft" <elecraft at mailman.qth.net>
Sent: Wednesday, September 30, 2020 10:49:53 PM
Subject: Re: [Elecraft] K3 RX dead 80/20 meters

RX ANT not activated on 80 and 20?

Victor 4X6GP 

> On 1 Oct 2020, at 6:58, Jim Kennedy <kennedyjp at cableone.net> wrote:
> 
> Hello all, I need some help ! My K3 s/n 3378 has gone deaf on 80 and 20 meters, all other bands are good. It does not have a second receiver installed. I have confirmed the receive signal on the other bands is good with my HP 8640B signal generator. I can get a signal thru it on 80/20 meters but it takes a ton of RF from the signal generator. The attenuator is not on nor the preamp. The internal antenna tuner works as expected. I have normal power out on all bands including 80/20 meters measured with a Bird 43 and Bird dummy load. Any help would be much appreciated. 
> 
> Jim 
> W7OUU 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2vco.vic at gmail.com