[Elecraft] K3 RX dead 80/20 meters
Vic Rosenthal
k2vco.vic at gmail.com
Thu Oct 1 00:49:53 EDT 2020
RX ANT not activated on 80 and 20?
Victor 4X6GP
> On 1 Oct 2020, at 6:58, Jim Kennedy <kennedyjp at cableone.net> wrote:
>
> Hello all, I need some help ! My K3 s/n 3378 has gone deaf on 80 and 20 meters, all other bands are good. It does not have a second receiver installed. I have confirmed the receive signal on the other bands is good with my HP 8640B signal generator. I can get a signal thru it on 80/20 meters but it takes a ton of RF from the signal generator. The attenuator is not on nor the preamp. The internal antenna tuner works as expected. I have normal power out on all bands including 80/20 meters measured with a Bird 43 and Bird dummy load. Any help would be much appreciated.
>
> Jim
> W7OUU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2vco.vic at gmail.com
More information about the Elecraft
mailing list