[Elecraft] K3S RX OUT

[Joe Subich, W4TV]

Yes, RX out is after the K3/K3S TR Switch and LPF.  You will need to
turn on the RX ANT function.  RX Out should be connected to to a
splitter with one output of the splitter going to the RSP1A (or other
SDR) and the other output of the splitter going to the RX IN.

A properly designed splitter prevents either receiver from "loading"
the other (excessive signal reduction) as well as preventing any
spurious products from one receiver being fed into the other.


73,

    ... Joe, W4TV


On 2020-11-14 11:31 AM, Jim McDonald wrote:
> Can an SDR, such as a SDRPlay RSP1A, be connected to the RX OUT jack on the K3S instead of using the IF OUT (on the radio or the P3)?
> 
> 73,  Jim N7US
>