[Elecraft] WSJT-X and Split operation with transverters

[Conrad PA5Y]

Thanks to all who helped with this. It appears that VFO B was on a different mode when I selected 144 MHz XV-2. So copying A>B worked fine and now I have split on 144MHz as well. It's a mistake that you only make once and will never be forgotten!

73


Conrad PA5Y

________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Conrad PA5Y <g0ruz at g0ruz.com>
Sent: 26 May 2020 01:54
To: elecraft at mailman.qth.net <elecraft at mailman.qth.net>
Subject: [Elecraft] WSJT-X and Split operation with transverters

Hi all. I use the WSJT-X split mode with my K3S on 6m to ensure that if I wish to TX with a low audio tone I will not have audio harmonics in the passband of the TX filter. This works very well. However when I tried it on 2m with my K3S and a transverter I get a message SPLIT N/A. Is this a menu setting that I am not aware of? I have checked that Diversity is not on for the XV-2 which is what I use for 2m.

It is a very useful feature when it is busy as I can often find a gap low down or very high.

Any help appreciated.

73

Conrad PA5Y
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to g0ruz at g0ruz.com