[Elecraft] WSJT-X and Split operation with transverters

[Nr4c]

To put a K3(S) into Split mode for DATA, both VFOs must be in same Mode/Submode before initiating Split. Easy way is to tap A=B twice quickly to copy frequency and other settings to VFO B. 

Sent from my iPhone
...nr4c. bill


> On May 25, 2020, at 7:56 PM, Conrad PA5Y <g0ruz at g0ruz.com> wrote:
> 
> Hi all. I use the WSJT-X split mode with my K3S on 6m to ensure that if I wish to TX with a low audio tone I will not have audio harmonics in the passband of the TX filter. This works very well. However when I tried it on 2m with my K3S and a transverter I get a message SPLIT N/A. Is this a menu setting that I am not aware of? I have checked that Diversity is not on for the XV-2 which is what I use for 2m.
> 
> It is a very useful feature when it is busy as I can often find a gap low down or very high.
> 
> Any help appreciated.
> 
> 73
> 
> Conrad PA5Y
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com