[Elecraft] High Current only on 20 Meters

[Leroy Buller]

I did a recalibration.   Nada.  Off to support

Lee

On Wed, Mar 4, 2020, 1:01 PM Don Wilhelm <donwilh at embarqmail.com> wrote:

> Lee,
>
> That should be fine.  Try doing the Transmit Gain Calibration on the K3
> and if it persists afterwards, email support at elecraft.com.
>
> 73,
> Don W3FPR
>
> On 3/4/2020 1:54 PM, Leroy Buller wrote:
> > Don. It goes to 12.9 volts on 20.  On 40 it goes to 13.0.  Current on
> > 20 goes to 24 amps then gives me the message.  No rig runner.  24 inch
> > #10 wire to the k3
>
>