[Elecraft] High Current only on 20 Meters

[Don Wilhelm]

Lee,

That should be fine.  Try doing the Transmit Gain Calibration on the K3 
and if it persists afterwards, email support at elecraft.com.

73,
Don W3FPR

On 3/4/2020 1:54 PM, Leroy Buller wrote:
> Don. It goes to 12.9 volts on 20.  On 40 it goes to 13.0.  Current on 
> 20 goes to 24 amps then gives me the message.  No rig runner.  24 inch 
> #10 wire to the k3