[Elecraft] K3 DATA setting

[Nr4c]

Please note that if you are trying to get SPLIT mode On. Both VFOs must be in same DATA mode before you activate SPLIT. Tap A>B twice quickly to do this. 

Sent from my iPhone
...nr4c. bill


> On Jun 26, 2020, at 2:03 PM, John McBride <jlm124 at outlook.com> wrote:
> 
> 
> No, it does not but thanks for asking.
> 
> From: Nr4c <nr4c at widomaker.com>
> Sent: Friday, June 26, 2020 11:35 AM
> To: John McBride <jlm124 at outlook.com>
> Cc: elecraft at mailman.qth.net <elecraft at mailman.qth.net>; donwilh at embarqmail.com <donwilh at embarqmail.com>
> Subject: Re: [Elecraft] K3 DATA setting
>  
> Does your software have anything to do with this?
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
> > On Jun 26, 2020, at 11:43 AM, John McBride <jlm124 at outlook.com> wrote:
> > 
> > Thanks for the replies. I am not using split mode, and am trying to make the change from USB to DATA A in the individual bands of 20 and 15 meters. Yes, the change was made successfully for 40 meters from LSB to DATA A. Any thing else I should check? Knowing me there is probably an easy answer.
> > 
> > John
> > ________________________________
> > From: Don Wilhelm <donwilh at embarqmail.com>
> > Sent: Thursday, June 25, 2020 6:47 PM
> > To: John McBride <jlm124 at outlook.com>; elecraft at mailman.qth.net <elecraft at mailman.qth.net>
> > Subject: Re: [Elecraft] K3 DATA setting
> > 
> > John,
> > 
> > Mode is a per band setting.  So do not expect it to be 'sticky' from
> > band to band.
> > Once you go to the band for operation, you should be able to change the
> > mode.
> > 
> > 73,
> > Don W3FPR
> > 
> >> On 6/25/2020 6:14 PM, John McBride wrote:
> >> I am getting my K3 ready to use PSK31 on Field Day. 40 meters is configured for DATA A, but I can't change 20 or 15 meters from USB to DATA A. What direction or suggestion do you have to make this change.
> >> 
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to nr4c at widomaker.com