[Elecraft] K3 DATA setting

[James Bennett]

When you press the mode button on the K3, it should cycle through: USB—>CW—>DATA—>AM—>FM—> and then back to CW. What does your do?

If it indeed displays DATA and you leave it there, then push and hold the AFX/Data MD button, turning the VFO-B knob should cycle you through: Data A—>AFSK A—FSK D—>PSK D—> and then back to DATA A. Your result?

Jim / W6JHB

> On Jun 26, 2020, at 11:03 AM, John McBride <jlm124 at outlook.com> wrote:
> 
> No, it does not but thanks for asking.
> 
> ________________________________
> From: Nr4c <nr4c at widomaker.com>
> Sent: Friday, June 26, 2020 11:35 AM
> To: John McBride <jlm124 at outlook.com>
> Cc: elecraft at mailman.qth.net <elecraft at mailman.qth.net>; donwilh at embarqmail.com <donwilh at embarqmail.com>
> Subject: Re: [Elecraft] K3 DATA setting
> 
> Does your software have anything to do with this?
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Jun 26, 2020, at 11:43 AM, John McBride <jlm124 at outlook.com> wrote:
>> 
>> Thanks for the replies. I am not using split mode, and am trying to make the change from USB to DATA A in the individual bands of 20 and 15 meters. Yes, the change was made successfully for 40 meters from LSB to DATA A. Any thing else I should check? Knowing me there is probably an easy answer.
>> 
>> John
>> ________________________________
>> From: Don Wilhelm <donwilh at embarqmail.com>
>> Sent: Thursday, June 25, 2020 6:47 PM
>> To: John McBride <jlm124 at outlook.com>; elecraft at mailman.qth.net <elecraft at mailman.qth.net>
>> Subject: Re: [Elecraft] K3 DATA setting
>> 
>> John,
>> 
>> Mode is a per band setting.  So do not expect it to be 'sticky' from
>> band to band.
>> Once you go to the band for operation, you should be able to change the
>> mode.
>> 
>> 73,
>> Don W3FPR
>> 
>>> On 6/25/2020 6:14 PM, John McBride wrote:
>>> I am getting my K3 ready to use PSK31 on Field Day. 40 meters is configured for DATA A, but I can't change 20 or 15 meters from USB to DATA A. What direction or suggestion do you have to make this change.
>>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w6jhb at me.com