[Elecraft] K3 DATA setting

[Nr4c]

Does your software have anything to do with this?

Sent from my iPhone
...nr4c. bill


> On Jun 26, 2020, at 11:43 AM, John McBride <jlm124 at outlook.com> wrote:
> 
> Thanks for the replies. I am not using split mode, and am trying to make the change from USB to DATA A in the individual bands of 20 and 15 meters. Yes, the change was made successfully for 40 meters from LSB to DATA A. Any thing else I should check? Knowing me there is probably an easy answer.
> 
> John
> ________________________________
> From: Don Wilhelm <donwilh at embarqmail.com>
> Sent: Thursday, June 25, 2020 6:47 PM
> To: John McBride <jlm124 at outlook.com>; elecraft at mailman.qth.net <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3 DATA setting
> 
> John,
> 
> Mode is a per band setting.  So do not expect it to be 'sticky' from
> band to band.
> Once you go to the band for operation, you should be able to change the
> mode.
> 
> 73,
> Don W3FPR
> 
>> On 6/25/2020 6:14 PM, John McBride wrote:
>> I am getting my K3 ready to use PSK31 on Field Day. 40 meters is configured for DATA A, but I can't change 20 or 15 meters from USB to DATA A. What direction or suggestion do you have to make this change.
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com