[Elecraft] K3 DATA setting

[John McBride]

Thanks for the replies. I am not using split mode, and am trying to make the change from USB to DATA A in the individual bands of 20 and 15 meters. Yes, the change was made successfully for 40 meters from LSB to DATA A. Any thing else I should check? Knowing me there is probably an easy answer.

John
________________________________
From: Don Wilhelm <donwilh at embarqmail.com>
Sent: Thursday, June 25, 2020 6:47 PM
To: John McBride <jlm124 at outlook.com>; elecraft at mailman.qth.net <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K3 DATA setting

John,

Mode is a per band setting.  So do not expect it to be 'sticky' from
band to band.
Once you go to the band for operation, you should be able to change the
mode.

73,
Don W3FPR

On 6/25/2020 6:14 PM, John McBride wrote:
> I am getting my K3 ready to use PSK31 on Field Day. 40 meters is configured for DATA A, but I can't change 20 or 15 meters from USB to DATA A. What direction or suggestion do you have to make this change.
>