[Elecraft] [K3] RTTY Setup

[John Reilly]

I've recently changed from FSK to AFSK, and having issues. FWIW, I am 
using N1MM with 2Tone as my RTTY interface, with the K3 internal sound card.

First, When I go to DATA MD, it is always set to FSK D. I reset it to 
AFSK A and it works; however, if I change bands, it resets itself to FSK 
D. The AFSK A setting does not "stick" - is there a way to make the K3 
remember this setting?

Second, the K3 is staying in Transmit after the RTTY message is 
finished. I usually have to press the XMIT button to return to receive. 
I do not have anything setup in the 2Tone PTT box, which I suspect is 
the problem. I tried to use the serial DTR, but 2Tone was unable to use 
the serial port that N1MM was using. I also tried VOX, but did not see a 
difference. Any suggestions for setting up AFSK PTT?

Thanks,
   - 73, John, N0TA