[Elecraft] KPA1500 fan mod done - MUCH better

[Eric Norris]

I had completely forgotten that I did this mod, and the two resistors mod.
That, and the piece of grit or whatever that was stuck in one of the PSU
fans making it scream like a banshee, took the KPA1500 PSU fan noise from
being intolerable to unnoticable.

Good times!  Ain't it grand!

73 Eric WD6DBM

On Thu, Jun 4, 2020, 4:59 PM <rocketnj at gmail.com> wrote:

> Hi All,
>
>
>
> Received the new LED board for my KPA1500 power supply. Easy to swap out,
> six plugs and two screws. You can move one plug at a time to the new board
> so there is no chance of screwing anything up. To put the screws back in I
> suggest a Phillips screwdriver with magnetic tip. It took more time to
> remove the 16 screws from the top cover than to swap the board.
>
>
>
> THANK YOU Elecraft!
>
>
>
> 73
>
> Dave wo2x
>
>
>
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to norrislawfirm2 at gmail.com
>