[Elecraft] KPA1500 fan mod done - MUCH better

[Ken K6MR]

You didn’t happen to notice the value of the changed resistor did you?  The fan resistor is the big one.

Ken K6MR

From: rocketnj at gmail.com<mailto:rocketnj at gmail.com>
Sent: Thursday, June 4, 2020 17:00
To: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net>
Subject: [Elecraft] KPA1500 fan mod done - MUCH better

Hi All,



Received the new LED board for my KPA1500 power supply. Easy to swap out,
six plugs and two screws. You can move one plug at a time to the new board
so there is no chance of screwing anything up. To put the screws back in I
suggest a Phillips screwdriver with magnetic tip. It took more time to
remove the 16 screws from the top cover than to swap the board.



THANK YOU Elecraft!



73

Dave wo2x







______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6mr at outlook.com