[Elecraft] FIXED--was NOT the feedline

[donovanf at starpower.net]

Dave, 


Try Josh's technique, you won't regret it. But I never use Scotchkote 
because UV very quickly destroys it. 


73 
Frank 
W3LPL 
----- Original Message -----

From: rocketnj at gmail.com 
To: "Josh Fiden" <josh at voodoolab.com>, "Elecraft Reflector" <Elecraft at mailman.qth.net> 
Sent: Wednesday, June 3, 2020 11:08:51 PM 
Subject: Re: [Elecraft] FIXED--was NOT the feedline 

A layer of friction tape is also a good way to keep the connectors sticky free. 

Dave wo2x 


-----Original Message----- 
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Josh Fiden 
Sent: Wednesday, June 3, 2020 4:35 PM 
To: Elecraft Reflector <Elecraft at mailman.qth.net> 
Subject: Re: [Elecraft] FIXED--was NOT the feedline 

To make it come off *really* clean, I like to put the 1st layer of vinyl tape sticky side out. Then self-fusing tape, another layer of vinyl tape (3m 33+ or 88). And because overkill is never enough, paint with some Scotchkote last! 

73 
Josh W6XU 

Sent from my mobile device 

>> On Jun 3, 2020, at 12:50 PM, Buck <radiok4ia at gmail.com> wrote: 
> Electrical tape, then the self-fusing tape, then electrical tape. 
> The first layer of electrical tape makes it easier to removing the 
> fusing tape later 

______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html Message delivered to rocketnj at gmail.com 

______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to donovanf at starpower.net