[Elecraft] FIXED--was NOT the feedline

[rocketnj at gmail.com]

A layer of friction tape is also a good way to keep the connectors sticky free. 

Dave wo2x


-----Original Message-----
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Josh Fiden
Sent: Wednesday, June 3, 2020 4:35 PM
To: Elecraft Reflector <Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] FIXED--was NOT the feedline

To make it come off *really* clean, I like to put the 1st layer of vinyl tape sticky side out. Then self-fusing tape, another layer of vinyl tape (3m 33+ or 88). And because overkill is never enough, paint with some Scotchkote last!

73
Josh W6XU

Sent from my mobile device

>> On Jun 3, 2020, at 12:50 PM, Buck <radiok4ia at gmail.com> wrote:
> Electrical tape, then the self-fusing tape, then electrical tape.  
> The first layer of electrical tape makes it easier to removing the 
> fusing tape later

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to rocketnj at gmail.com