[Elecraft] K3S in QRP mode

[Jim Rhodes]

Check that the KPA3 is turned on to "nor" in the config menu. (Just don't
ask me how I know.)


On Sun, Jul 26, 2020 at 2:41 PM Bill DeVore <maxrcul at gmail.com> wrote:

> I recently did a Parameter Initialization on my K3S. I didn’t save the
> current firmware configuration as I’ve never done any custom programming on
> the radio.
>
> After performing the initialization, a full rotation of the Power knob
> only goes from 0 to a maximum of 12 w on any band. Prior to the
> initialization of the rig, I could adjust power all the way to a max of
> 110w on each band.
>
> Did the initialization set the rig in QRP mode? I sure hope there’s a
> configuration menu somewhere that I can change to get the radio back to
> full power.
>
> Bill - W3PNM
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com



-- 
Jim K0XU
jim at rhodesend.net