[Elecraft] Can't Hear My Sending CW on K3S

[Nr4c]

You probably have the TX Monitor set to zero. Press and hold for 3 sec the Comp/Pwr knob. VFO B display will change to TX MON and show setting. Adjust as needed (2-5 should be in ballpark). 

Sent from my iPhone
...nr4c. bill


> On Jul 16, 2020, at 1:05 PM, John Stengrevics <jstengrevics at comcast.net> wrote:
> 
> When I send CW on my K3S, I cannot hear it either on the speaker or phones.  As most probably are, I am dependent on the auditory feedback to send CW properly.
> 
> I suspect I have a setting wrong.
> 
> Any advice would be much appreciated.
> 
> 73,
> 
> John
> WA1EAZ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com