[Elecraft] Connecting K3/0 to K3S

[Nr4c]

I believe Elecraft has to cable you need. 

Sent from my iPhone
...nr4c. bill


> On Feb 17, 2020, at 6:07 PM, W4IEN <w4ien at comcast.net> wrote:
> 
> I have a problem that I am sure some of you have run into.  I am trying to use my K3S remotely using a K3/0 with the RemoteRig 1258 MKIIs hardware.  I can get everything set up except for the connection from the RS232 to the RS232 on the RemoteRig hardware.  The RS232 on the K3S does not have the same type of connector  as the RemoteRig hardware.  Has anyone gotten around this problem.  Any help would be appreciated.  Hope I explained my situation well enough so it is understandable.
> 
> 72/73,
> EM73vx
> Robin
> G-QRP #12386
> SKCC #7294
> W4IEN 
> w4ien at comcast.net
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com