[Elecraft] Interfacing K2 to KPA1500?

[eric norris]

Don, et al,
Can I assume the same is true of a K2/10 with the AUX IO option?  Are they wired the same?

73, Eric WD6DBM

  
 
  On Sat, Dec 12, 2020 at 9:47 AM, Don Wilhelm<donwilh at embarqmail.com> wrote:   Eric,

The KPA100 RS-232 data appears on pins 2 and 3 of the AUX IO connector 
with pin 5 being RS-232 Signal Ground.  Chassis ground is on pin 1. See 
the KPA100 manual.
DO NOT connect to any other pins of the AUX IO connector, those are 
internal K2 signals to be used by external devices such as the KAT100 or 
XV series transverters.

I can't help with the KPA1500 end.

73,
Don W3FPR

On 12/12/2020 8:05 AM, eric norris via Elecraft wrote:
> The KPA1500 Manual mentions using a K2 with serial interface for band data, but does not show how to wire it (that I can find).  I can't find it in the nabble archive either.  Does anyone know how to do this?
> Thanks and
> 
> 73, Eric WD6DBM