[Elecraft] K4 Questions

[Barry LaZar]

Grant,
     I know how you feel. It seems I'm missing a bunch of information. I
guess it must be my advancing age.

73,
Barry
K3NDM

On Sat, Aug 15, 2020, 11:53 AM Grant Youngman <ghyoungman at gmail.com> wrote:

> I recall that Eric answered a question about that during one of the two 90
> minute Q&As at the Expo.
>
> I think he said it may be available at some point, but indicated it was
> possibly over ethernet (?) rather than USB.  But I could be mistaken, since
> I’m lucky to remember my name unless I look at my driver’s license … if I
> can remember where that is :-)
>
> Whichever it is, it didn’t sound like it was going to be a first release
> feature.
>
> Grant NQ5T
>
> > On Aug 15, 2020, at 11:42 AM, Barry LaZar <k3ndm at comcast.net> wrote:
> >
> > Bill,
> >     I really don't know. If it was posted, I missed it.
> >
> > 73,
> > Barry
> > K3NDM
> >
> > On Sat, Aug 15, 2020, 2:27 AM Nr4c <nr4c at widomaker.com> wrote:
> >
> >> Barry
> >>
> >> Did I read months ago that I/Q might be available on USB?  Or was it
> posed
> >> as a question or suggestion?
> >>
> >> Sent from my iPhone
> >> ...nr4c. bill
> >>
> >>
> >>> On Aug 15, 2020, at 12:03 AM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
> >>>
> >>> On Tue, Aug 11, 2020 at 5:51 PM Barry LaZar <barrylazar2 at gmail.com>
> >> wrote:
> >>>
> >>>> is the pan presentation fixed as to frequency span or can the
> frequency
> >>>> span be adjusted; I typically use 25-50 KHz on CW or
> >>>> less on data modes.
> >>>
> >>>
> >>> Span and center frequency are adjustable.  Fixed or tracking mode is
> >>> available.  Scrolling mode (to prevent VFO cursor from going off
> screen)
> >>> has different options, similar to P3:  full page, half page, slide,
> etc.
> >>>
> >>>
> >>>> Next can the xvter IF out be used as the IF out on the K4D?
> >>>
> >>>
> >>> Probably it will work the same as a K3.
> >>>
> >>>
> >>>> Or, is the I&Q available for use o0n applications like CW Skimmer;
> This
> >>>> requires a MME format.
> >>>>
> >>>
> >>> I don't think that will work.  Connecting a separate SDR to RX ANT OUT
> >>> would be a simpler way to do it.  A program like HDSDR can keep the SDR
> >>> frequency in sync with the K4 frequency.
> >>>
> >>> 73,
> >>> Bob, N6TV
> >>> ______________________________________________________________
> >>> Elecraft mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:Elecraft at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>> Message delivered to nr4c at widomaker.com
> >>
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to ghyoungman at gmail.com
>
>